Customer service

Lumedi lighting consists of energy-efficient LEDs. Per LED, they consume 0.06W. 

This results in the following consumption figures per model:

• Lumedi 360 Led - 200cm = 21.6W (0.0216 KW) per hour
• Lumedi 480 Led - 300cm = 28.8W (0.0288 KW) per hour
• Lumedi 640 Led - 400cm = 38.4W (0.0384 KW) per hour
• Lumedi 880 Led - 600cm = 52.8W (0.0528 KW) per hour
• Lumedi 1200 Led - 600cm = 72W (0.072 KW) per hour
• Lumedi 2000 Led - 600cm = 120W (0.120 KW) per hour
• Lumedi 1600 Led - 700cm = 96W (0.096 KW) per hour
• Lumedi 1600 Led - 800cm = 96W (0.096 KW) per hour
• Lumedi 2000 Led - 1000cm = 120W (0.120 KW) per hour

The smallest one consumes per 46 hours and 17 minutes, 1 KWH

The largest consumes per 8 hours and 20 minutes, 1 KWH

Please note that the price you pay per KWH depends on your energy supplier and contract.

You will receive a pole with a ground spike with the models below:

• Lumedi 320 LED (battery-powered) - 200 cm
• Lumedi 360 LED - 200 cm
• Lumedi 480 LED - 300 cm
• Lumedi 640 LED - 400 cm

These models are therefore supplied complete.

Do you want to install larger lighting, but do not have a flagpole? Then you can use an easy to assemble & disassemble pole of 600, 700 or 800 cm. You can find these in the webshop via this link, https://www.lumedi.eu/en/divisible-poles/.

Lumedi lighting on power is standard 'warm white' in colour, 2450K.

Battery-powered Lumedi is also 'warm white' in colour, 2700K.

It is important that the maximum length of the lighting is the length of the pole that is above ground.

If your pole is 9 m high, but about 80 cm of it is in a ground pipe, you can place lighting that is about 8 m high. 

The length of the Christmas tree lights is stated in the product names on our webshop.

For models of up to 400 cm, you receive a pole with a ground stake.

Insert the ground stake into the ground up to the pole holder. Then insert the pole into the holder and screw tight.

To do this, follow the manual supplied with the lighting. 

Have you lost the manual? Then you can download it below:

Lumedi 320 LED (battery-powered) - 200cm

Lumedi 2,3,4 meters

Lumedi 6,7,8,10 meters

All models have a certain diameter (total width at the bottom of the lighting).

Important to keep in mind if you wish to place the lighting near groves or other obstacles. The diameters of all models are described below:

• Lumedi 320 LED (battery-powered) - 200cm = 100cm Ø (50cm around the pole)
• Lumedi 360 LED - 200cm = 100cm Ø (50cm around the pole)
• Lumedi 480 LED - 300cm = 145cm Ø (72.5cm around the pole)
• Lumedi 640 LED - 400cm = 190cm Ø (95cm around the pole)
• Lumedi 880 LED - 600cm = 275cm Ø (137.5cm around the pole)
• Lumedi 1200 LED - 600cm = 275cm Ø (137.5cm around the pole)
• Lumedi 2000 LED - 600cm = 275cm Ø (137.5cm around the pole)
• Lumedi 1600 LED - 700cm = 320cm Ø (160cm around the pole)
• Lumedi 1600 LED - 800cm = 360cm Ø (180cm around the pole)
• Lumedi 2000 LED - 1000cm = 400cm Ø (200cm around the pole)

It takes about 30 minutes to set up the Christmas tree.

There is a 2-year manufacturer's warranty on Christmas tree lights

All Lumedi models are IP44 certified. This means that the lighting can withstand splashing water (10 litres per minute) from all directions.

This makes the lighting very suitable for outdoor use.

You connect the Lumedi lighting to a socket. This can be done outdoors or indoors, in your home, shed or garage.

Lumedi models have a connecting cable of 8 metres long.

The exception is of course the Lumedi 320 LED - 200cm, which is battery-powered.

Should this length not be sufficient, you can find extension cables in the webshop via this link, https://www.lumedi.eu/en/extension-cable-10m.html

Lumedi lighting can be controlled with the included remote control. This remote control works up to 30 metres away. It allows you to select various mood, timer and dimmer functions.

Is your Lumedi remote control broken or is the battery flat? Then you can use the buttons on the transformer. Consult the manual for this.

Lumedi lighting has 4 light intensity levels.

You can select the desired brightness level by clicking the 'DIM -' or 'DIM +' button on the remote control.

Lumedi models have three timer modes you can make use of. These are:

• 6 hours on - 18 hours off
• 8 hours on - 16 hours off
• timer function off

Click 'TIMER OFF' to disable the timer function.

Click 'TIMER 6h' to set the timer so that the lighting stays on for 6 hours and off for 18 hours.

Click 'TIMER 8h' to leave the lighting on for 8 hours and off for 16 hours.

It goes without saying that neat, tidy lighting can be set up more quickly and easily the next season. It is therefore important to store the lighting neatly.

We recommend that you remove the lighting from the pole after use, put the top of the lighting down, and lay out the strands of lighting from top to bottom guiding them downwards.

You can then roll up the lights from left to right and put them in the box or bag. In doing so, you should be able to take the top of the lighting, when using it the next time, out of the bag or box first.

You will need three 'D' batteries for the Lumedi 320 LED (battery-powered) - 200cm.

You need one coin cell battery for the Lumedi remote control. The specific model is: 'CR2025'.